Gamajet 9 Tank Cleaning Machine
A quantum leap in tank cleaner durability, efficiency, and price, the Gamajet IX is a totally new tank cleaning system. The Gamajet IX Tank Cleaning Machine offers compact cleaning for small and mid-sized tanks with fewer parts, and a highly durable design, providing superior performance at an affordable price, making it the ultimate tote washer.
Fewer parts means fewer breakdowns and lower maintenance costs. Coupled with Gamajet’s renowned product quality, the revolutionary Gamajet IX Tank Cleaning Machine designed-in durability allows its use in rugged applications in the harshest environments.
The Gamajet IX, like other Gamajets, is a high-quality tank cleaning machine. Originally designed for tote cleaning applications, the Gamajet IX Tank Cleaning Machine is also perfect for other small and mid-sized tank cleaning applications.
Its 360° spray pattern provides thorough scouring of the entire tank or tote, reducing operating time and costs. At an unbelievably low price, the Gamajet IX Tank Cleaning Machine sets the standard for cost-effective impingement tank cleaning and tote washing.
Gamajet 9 Technical Specs
- Pressure: 50 to 1000+ PSI (3 to 69 bar)
- Temperature: 32° to 250°F (0° to 121°C)
- Flow Rate: 4 to 30+ GPM (15.14 to 113.56 l/min)
- Cleaning Radius: 7.5′ (2.3 Meters)
- Wash Cycle Time: 4-15 Minutes
- Impact: 12 lbs (5.5 kg) at 10′(3m)
- Height: 8.75″ (222.25 mm)
- Body Diameter: 1.80″ (45.72 mm)
- Weight: 5 lb (2.27 kg)
- Clearance: 2.76″ (70.104 mm) minimum passageway I.D.
Quad nozzles for faster cleaning
Modified version to work with a pressure washer.
3/4″ NPT; 1 1/4″ Camlock; Tri-clover sanitary inlets are available. Construction/Design: Parts are machined from 316-L Stainless Steel investment castings or bar stock.
Impeller & Final Shafts
For increased wear resistance, the rotor shaft is plasma-sprayed with a Chromium Oxide coating on Stainless Steel. Shaft & Gearbox Bushings: Rotor shaft thrust is absorbed by a tungsten carbide bushing. Gearbox bushings are carbon-filled-reinforced polyphenylene sulfide.
Bearings in the rotating tee and nozzle housings are self-lubricating, carbon-fiber-reinforced polyphenylene sulfide. Bearing Cups: Main body castings are protected by replaceable 316-L Stainless Steel cups for extended frictional wear life.
O-ring materials are selected for each application. Viton® is standard, with Kalrez® and EPDM available. Other materials can be supplied on special order.
Dynamic shaft seals are spring-loaded, double-lipped and made of PTFE. They are reinforced with carbon fiber for extra-long wear and protection against leakage, abrasion and deposit build-up.
Dual or quad 0.050″ (1.27 mm) to 0.225″ (5.72 mm) orifice diameters. Other nozzle sizes available upon request. Drive Mechanism: The wash fluid enters the Gamajet at the inlet collar where it encounters and spins rotor blades. The rotor blades are attached to the top of the rotor shaft. The bottom of this shaft is connected to the inside of a sealed, planetary gearhead which then turns the body in the horizontal plane and the nozzles in the vertical plane.
The sealed planetary gearhead has an external casing made of steel, surface-anodized to increase corrosion resistance. This sealed gearhead is located inside the gearbox, which itself is sealed, and thus does not require end caps and the output shaft are stainless steel.
A food-grade grease is inside the sealed gearhead casing. No customer-supplied or user-maintained lubricant is needed.
Gamajets are warranted for eighteen months from the date of shipment against any defects in workmanship or materials. Normal maintenance parts such as O-rings and bearings and are not included under this warranty, nor is damage caused by dropping, use of destructively corrosive fluids, or other abuse. This warranty shall not apply to any malfunction resulting from use of non-Gamajet replacement parts purchased from any source other than Gamajet or an authorized Gamajet distributor. For full details, see Gamajet “Terms and Conditions of Sale.”