Gamajet Aseptic 6 Tank Cleaning Machine

Gamajet Aseptic 6 Tank Cleaning MachineThe Permanently Installed Aseptic Impingement Tank Cleaner

The revolutionary Gamajet Aseptic 6 Tank Cleaning Machine is designed for permanent installation and to provide true germ and bacteria-free cleaning to meet the demands of the beverage, food, pharmaceutical and personal care products industries.

The design of the Aseptic 6 Tank Cleaning Machine completely eliminates all areas for potential bacteria growth making it ideal for sanitary cleaning applications.

Variable flow rates and a consistent 360 degree spray pattern ensure reproducible and repeatable cycles that provide thorough and verifiable cleaning.

Its compact size fits through a standard 3″ (76.2 mm) sanitary fitting, and its light weight makes for easy handling and maneuverability.

The Aseptic 6 Tank Cleaning Machine is patented and represents the first validatable method of providing true aseptic tank cleaning from a permanently installed impingement cleaner for sanitary applications.

Gamajet Aseptic VI Technical Spec

Operating Range

  • Pressure: 10 to 400 psi (0.7 to 27.2 bar)
  • Temperature: 32° to 190°F (0° to 87.8°C)
  • Flow Rate: 5 to 40 GPM (19 to 151+ l/min)
  • Cleaning Radius: 5′ (1.5 Meters)
  • Wash Cycle Time: 10 to 12 Minutes

Overall Dimensions

  • Height: 7.875″ (200.025 mm)
  • Body Diameter: 1.75″ (44.45 mm)
  • Overall Width: 2.70″ (68.58 mm) including Nozzle Housing
  • Clearance: 2.80″ (71.12 mm) Minimum Passageway I.D.
  • Weight: 4 lb (1.81 kg)

Other Options

Non-Aseptic Unit
Varying Sanitary Inlet Adaptors Available

Other Specifications

Inlet Connection

Connections include 1 1/2″ Butt Weld or 1″ Slip-Joint and Retaining Clip.

Construction/Design

Parts are machined from 316-L Stainless Steel investment castings or bar stock.

Input & Final Shaft

For increased wear resistance, the input and output shaft is plasma-sprayed with a Chromium Oxide coating on Stainless Steel.

Shaft & Gearbox Bushings

Input shaft thrust is absorbed by a Tungsten carbide bushing. Gearbox bushings are Polyetheretherkeytone. Bearings: Bearings in the rotating tee and nozzle housings are self-lubricating, Polyetheretherkeytone.

Bearing Cups

Main body castings are protected by replaceable 316-L Stainless Steel cups for extended frictional wear life.

Nozzle Carrier

Dual or triple nozzle

Nozzles

0.125″ (3.18 mm), 0.135″ (3.43 mm), 0.150″ ( 3.81 mm), 0.165″ (4.19 mm), 0.187″ (4.75 mm), 0.200″ (5.08 mm) and 0.225″ (5.71 mm) orifice diameters; .125″ to .225″ nozzles are standard. Other nozzle sizes are available upon request.

Drive Mechanism

The wash fluid enters the Gamajet at the inlet collar where it encounters and spins turbine blades. The turbine blades are attached to the top of the input shaft. The bottom of this shaft is connected to the inside of a flow-through, planetary gearhead which then turns the body in the horizontal plane and the nozzles in the vertical plane.

Planetary Gearhead

The flow-through planetary gearhead incorporates all stainless steel components.

Lubricant

The Gamajet Aseptic 6 is a non-lubricated, contaminant-free unit and does not contain any lubricants. No customer-supplied or user-maintained lubricant is needed.

Gear Ratio

256:1.

Warranty

Gamajets are warranted for eighteen months from the date of shipment against any defects in workmanship or materials. Normal maintenance parts such as o-rings and bearings and are not included under this warranty, nor is damage caused by dropping, use of destructively corrosive fluids, or other abuse. This warranty shall not apply to any malfunction resulting from use of non-Gamajet replacement parts purchased from any source other than Gamajet or an authorized Gamajet distributor. For full details, see Gamajet “Terms and Conditions of Sale.”

Make an Enquiry